BoneDry XT

BoneDry RPT
BoneDry WPT

GreyHound SG

BoneDry™ XT

BoneDry™ XT
is a commercial grade waterproofing membrane based on polymer modified asphalt emulsion. BoneDry™ XT is used as a below-grade exterior waterproofing compound and exhibits excellent strength, adhesion, and flexibility. BoneDry™ XT is a premium grade waterproofing compound used in commercial building construction and can be used for all other types of below-grade waterproofing as well.

BoneDry™ XT is spray applied and can instantly build virtually any thickness1 your job demands. Instant thickness means you can install the remainder of your waterproofing system immediately after the product has been sprayed – no additional trips to complete waterproofing because your membrane isn’t cure.

Property Test Method Value
Color   Black/Brown
Solids   63% ± 2%
Thickness   40-60 mil dry
Tensile Strength ASTM D-412 87 psi
Elongation ASTM D-412 1800%
MVT ASTM E-96 0.19 gr/hr*sq.ft
Adhesion to Concrete ASTM C-834 Exceeds
Shore Hardness ASTM C-836 75
Crack Bridging ASTM C-836 Exceeds
Low Temp Flexibility ASTM C-836 No Cracking
Perm Rating ASTM C-836 0.38 perms

• Masonry Foundations
• Poured Foundations
• Pre-Cast Foundations
• Horizontal Waterproofing
• Planters
• Retaining Walls
• Cavity Wall Air Barrier

1 To obtain recommended thickness this product must be used with BoneDryTM Accelerator.

BoneDry™XT waterproofing membrane shown with available12” DrainMaxTM foundation strip drain to make the BD1000 Waterproofing System

© DryDog Barriers, LLC